High Resolution 4 Channel Car DVR Recorder With Automatic Identification System

High Resolution 4 Channel Car DVR Recorder With Automatic Identification System

4 Channel Car DVR Recorder  Description

• Power Led, electricity, light, when the system is in standby state, the power indicator lights flashing;

Status Led, electricity, light, when the system is recording, the power indicator lights flashing. This product

is the normal input voltage is 12V/24V.

(2) trigger line and manual keys can select the image in any way 4-way camera

(3)In Trigger state, hand the keys effectively. When you press the manual key "Quad" of orbutton,

the trigger is invalid, Undo "QUAD" trigger to be effective

(4) After triggering undo, image delay three seconds, and enters the standby state.

(5) the trigger condition, no priority, when the trigger line when more than two trigger, then the trigger line

corresponding channel full-screen image,only three seconds, and then jumps automatically split image screen.

(6) can connect up to four cameras, and automatically split video screen

(7) car camera powered by the device for easy wiring

(8) DVD navigation screen display is triggered by the "red line" switching equipment, wiring and display convenience

(9) Each image can be set to forward / mirroring respectively; RCA connectors can be configured to connect DVD

4 Channel Car DVR Recorder Technical parameters

the screen mode

★Auto Mode introduces :( numbers represent the corresponding camera channel number, the channel number is not shown)

1. When connected to four cameras, camera work after the car starts, the screen automatically displays Quad mode, automatically shut down after a delay of 5 seconds.

1. When connected to three cameras, the camera work after the car starts, the screen automatically displays three Split mode, automatically shut down after a delay of 5 seconds.
2. When connected to two cameras, camera work after the car starts, the screen automatically displays Dual split mode, automatically shut down after a delay of 5 seconds.
3. Forward Looking trigger boot, depending on Full screen before the show, trigger an automatic shutdown of the exit delay 3 seconds.
4. After triggering a front or reverse power, turn left, turn left light trigger Full display screen for 3 seconds after the resumption of the automatic segmentation of video images.
5. After triggering a front or reverse power, turn right at lights, turn right trigger Full display screen for 3 seconds to return to automatic segmentation of video images.
6. Reverse trigger on, linked to reverse gear reversing Full screen display, shut down automatically after hanging reverse gear delayed for 3 seconds,

★On-off system and Manual mode introduced:

1. Short press or long press (more than 1 second) SMT button boot, showing automatic segmentation of images,again, a short press or for a long time to press the SMT button to shutdown, the system enters standby mode, but the system still in the recording.

2. long press the SMT button to boot, short press button to switch image mode.

★ Host box with high integration technology, four cameras centralized power supply box by the host, thereby greatly reducing the tedious wiring during installation, in addition to four cameras captured the image signal after the hosts converted by a video cable and the navigation DVD of "AV" port connection

4 Channel Car DVR Recorder  Wiring Diagram Installation

<DIP switch>

★ mirror DIP switch: 4 switches, achieve about Mirror: dial-up ON, mirroring; OFF Just dial down. As default.

★ Parking DIP switch: a switch (fifth), to dial ON, system startup power loss protection, voltage is not enough, the system automatically dial down dormancy; OFF, power loss protection cancel.

To achieve parking video surveillance, proposed to ON state.

Four-core trigger line description

Four-wire:

Line 1 (Green) is a front view of the trigger line, you can access the Front

Office assist lamp or other neutral switch,When triggered,

the system boot, revoked, the system standby

Line 2 (white) left, as the trigger line, then turn left at light positive

(when the electric pen test twinkling).When the trigger,

automatic full screen display,

Line 3 (yellow) to reverse the trigger line, then reversing light positive,

When triggered, the system boot, when withdrawn,

system standby,

Line 4 (blue) to the right, as the trigger lines (sparking when electric

pen test) then turn right at lights positive,When triggered,

automatic full screen

The use of video recording:

1. Before using TF card format: TF card is inserted, power boot into POST mode (display

automatically turns off after five seconds into standby) by remote control Red Dot Button is on, press

ESC or Red Dot Stop recording (The default boot automatically start recording), press the "MENU"

button to enter the first page of the menu, press again to switch SETUP menu page, select

FORMAT, press the "REC or Red Dot ”,Press the left and right buttons to select EXECUTE,

press "ESC or Red Dot ” Formatting.

( 2 ) Modify the system date and time: Press the "MENU" button to enter the menu, press the switch to

the SETUP menu page, select DATE INPUT again, press "REC or Red Dot ”Key to enter the interface,

press the "left" or "right" key to switch to the SET, press "REC or Red Dot "Button to enter the date and

time by switching the left and right, press" MENU "button to confirm and switch, press" REC

or Red Dot "Button to confirm, press the" MENU "to exit.

( 3 ) Playback: Press "ESC or Red Dot "Stop video playback again, press“ Red Dot ”Key to enter the Playback

menu, press the "left" or "right" button to select the video file, press "REC or Red Dot "Button to select

the playback, press the" MENU "button to fast forward.

P.S.Blue background is selected, the yellow background is not selected.

Parking Monitor Description

Parking monitoring starting voltage must be greater than 12.5V (car batteries generally 13-14V), then the battery power, and a fifth DIP switch to dial up sign Parking REC
This product has a power loss protection, voltage less than 11.5V off automatically enter the sleep state, when the voltage is restored back to normal will automatically open parking video surveillance state.

Frequently Asked Questions

Question 1: SMD Tact switch function?
A: Long press (more than 1 second), the device starts to work, automatic image display screen (the default screen is H), long press again, the device enters the standby state; (Note: Press 1 second, the device starts, but Car navigation display screen response time takes about 1 second.)
Short press (less than 1 second), single-screen and "field" screen to cycle;
Question 2: 4 trigger lines how to wire?
A: Line 1 (Green) is a front view of the trigger wire, before the next depending on the assist lamp or other neutral switch place; the 2nd line (white) left, as the trigger line, then turn left positive light; the 3rd line (yellow) to reversing trigger line, then reversing light positive; Line 4 (blue) to the right, as the trigger line, then turn right at lights positive
Question 3: How to connect car navigation screen?
A: The device video output line connected car navigation screen, reverse video input port, the red line equipment output port connected to the reversing vehicle navigation screen test line, some car navigation screen video input is automatically detected, so reversing the test line can be removed.
Question 4: Why is there no output device?
A: Please check whether the device POWER Power lamp blinks, and if yes, then the device into standby mode, the output is off, press the power switch on the remote control or press the patch trigger switch device is turned on, POWER light long bright, video output device.
Question 5: Why dial left or right turn lamp lights, equipment no image?
A: The equipment in standby mode, dial left or right turn lamp lights, is not shown, because the normal driving, the driver will often toggle turn signal, if activated every time the screen display, it will affect the driver's driving safety a. If you intend to observe the situation around, press and touch switch or remote control to open the key.

4ch car dvr

multi channel car dvr

High Resolution 4 Channel Car DVR Recorder With Automatic Identification System Images